Frame Builder V1_1 Release by NateLiqGrav
Insert profiles into Alibre Design from the user's library of profiles. Build frames, miter, trim, and extend profiles!
Fixes:
- Now works with Alibre Design V22 Build 22053.
- Picking assembly level reference geometry points is now possible.
- Fixed incorrect text on Rotate Profile tool.
- Profile can now be mirrored across the X-Axis and Y-Axis.
Alibre Design V21 (Build 21033 or 21034) or Alibre Design V22 (Build 22044 or 22053).
Alibre Script Build 342398 or newer.
Alibre Design and Alibre Script are © 2020 Alibre, LLC
Copyright/License:
Frame Builder V1_1 © 2020 NateLiqGrav
All rights reserved except as noted:
You may use Frame Builder V1_1 free of charge for personal use or commercial use - but this may change in the next version.
I claim no ownership of the part files created by using the tool.
Instructions:
Download and extract everything from the "Frame Builder V1_1 Release.zip" file into the Alibre Script Library folder.
Next download and extract everything from the "Example Profile Library.zip" file where you want to keep the Profiles.
Then Launch Alibre Script in an Alibre Design Assembly and click on "Frame Builder V1_1 Release [Protected]" in the Alibre Script explorer to run it.
Check out the rest of the setup instructions by reading the help file by clicking the button "Help Info".
Please read all the help file included before asking any questions - but don't hesitate to ask if something isn't working as expected.
Downloads: Frame Builder V1_1 Release.zip was removed. Check for newer versions.
Frame Builder V1_1 Release.zip had been Downloaded 387 times
Example Profile Library.zip
Special Thanks to Lew Merrick for these sample AISC profiles.