Frame Builder V1_5 Release

Official Announcements from Liquid Gravity Productions.
Post Reply
Site Admin
Posts: 10
Joined: Mon Dec 09, 2019 5:14 am

Frame Builder V1_5 Release

Post by admin » Tue Jul 13, 2021 10:29 pm


Frame Builder V1_5 Release by NateLiqGrav
Insert profiles into Alibre Design from the user's library of profiles. Build frames, miter, trim, and extend profiles!

  • Fixed to now run (instead of error) when Alibre Design is installed on a different path or drive other than the default. If you don't have this problem then I wouldn't recommend installing this version as that is the ONLY change.

Alibre Design V21 (Build 21033 or 21034) or Alibre Design V22 (Build 22044, 22051, 22053, or 22061), or Alibre Design V23 (Build 23050, or 23050)
Alibre Script Build 342398 or newer.
Alibre Design and Alibre Script are © 2021 Alibre, LLC

Frame Builder V1_5 © 2021 NateLiqGrav
All rights reserved except as noted:
You may use Frame Builder V1_5 free of charge for personal use or commercial use - but this may change in the next version.
I claim no ownership of the part files created by using the tool.

Download and extract everything from the "Frame Builder V1_5" file into the Alibre Script Library folder.
Next (optionally) download and extract everything from the "Example Profile" file where you want to keep the Profiles.
Then Launch Alibre Script in an Alibre Design Assembly and click on "Frame Builder V1_5 Release [Protected]" in the Alibre Script explorer to run it.
Check out the rest of the setup instructions by reading the help file by clicking the button "Help Info".
Please read all the help file included before asking any questions - but don't hesitate to ask if something isn't working as expected.

Frame Builder V1_5
(561.54 KiB) Downloaded 126 times
Example Profile
Special Thanks to Lew Merrick for these sample AISC profiles.


Post Reply